The CS-40 LPI – 32A Electric Vehicle Charging Station is a conductive charge station that provides the electric vehicle (EV) user with a safe and manageable link between the power grid and the electric vehicle.
The following features are supported by the CS-40 LPI – 32A:
- Personal Protection system
- Ground Monitoring Circuit
- Off-Peak Charging
- Cold Load Pickup
- External Error Indication
- Maintenance Current
SPECIFICATIONS for CS-40 LPI- 32A
Line Input Power – Service Entrance
Voltage & Wiring 240V AC single-phase – L1, L2, and Safety Ground
208V AC 3-phase, wye-connected – Any 2 phases, and Safety Ground
240V AC 3-phase, delta-connected. With center-tap
on one leg, must use only the two phases on either
side of the center-tap. The two phases must both
measure 120V AC to ground. Do not use the third
leg (208V “stinger”).
Current (CS-40 LPI-32A) 40A Circuit Breaker. The maximum current for the vehicle is 32A, set by the duty cycle of the Pilot waveform.
Frequency 50/60 Hz
Output Power Variable depending on vehicle. Vehicles will be (CS-40 LPI- 32A) limited to 32A. At 240V, this will be about 7.2 KW.
Height 304 mm (12 in)
Width 457 mm (18 in)
Depth 203 mm (8 in)
Operating Temperature – 40°C (-40°F) to +50°C (+122°F)
NEMA Rating NEMA 4 – outdoor use, watertight.